Ford Probe Owner's Manual page 29

Installing Child Safety Seats
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portoin of
the front passenger seat and both rear seats. The
automatic locking mode must be used when
installing a child seat or infant carrier in the
front passenger seat or rear seats.
Never install a rear-facing child seat or
infant carrier in the right front passenger
seat.
If you install a child safety seat or infant carrier
in any of the seating positions, you must follow
the proper procedures:
1. Position the child seat or infant carrier on
the passenger seat of the vehicle.
2. Pull down on the shoulder belt, then grasp
the shoulder belt and lap belt together.
RWARNING
27