Engine Coolant - Ford Probe Owner's Manual

Hide thumbs Also See for Probe:
Table of Contents

Advertisement

Engine Coolant

Checking the engine coolant
NOTE: Be sure to read and understand
Precautions When Servicing Your Vehicle
at the beginning of this chapter.
The cooling fan is automatic and may
come on at any time. Always disconnect
the negative terminal of the battery before
working near the fan.
Inspect the coolant level with the dipstick
attached to the reservoir cap. Remove the cap,
wipe it clean and then put it back in the
reservoir. Remove it again. The coolant level
should be between L and F.
If the coolant level is at or below the L line, add
enough 50/50 mixture of specified coolant and
water to bring the level to the F mark.
RWARNING
221

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probe gt

Table of Contents