Ford Probe Owner's Manual page 120

To install the luggage compartment cover:
1. Raise the hatchback to the fully open
position.
2. From outside the vehicle, position the cover
in its sockets.
3. Attach the lift cords to the hatchback lid.
4. Connect the two front luggage compartment
cover lift cords to the lower trunk side trim.
5. Close the hatchback.
Do not push down on the luggage
compartment cover when the lift cords are
attached to the open hatchback lid. This
could cause the hatchback lid to close
unexpectedly.
120
RWARNING