Lexmark CX310 User Manual page 103

Understanding the printer menus
Use
Timeouts
Print Timeout
Disabled
1–255 sec
Timeouts
Wait Timeout
Disabled
15–65535 sec
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
To
Set the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print
job.
Notes:
•
"90 sec" is the factory default setting.
•
When the timer expires, any partially printed page still in the
printer is printed, and then the scanner checks to see if any
new print jobs are waiting.
•
Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print jobs.
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
•
"40 sec" is the factory default setting.
•
Wait Timeout is available only when the scanner is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Set the printer to restart when an error is encountered.
Note: "Reboot always" is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Notes:
•
5 is the factory default setting.
•
If the printer performs a number of automatic reboots that is
the same as the menu setting within a certain amount of
time, then the printer shows the applicable error instead of
restarting.
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
103