Lexmark CX310 User Manual page 102

Understanding the printer menus
Use
Allow Background Removal
On
Off
Scanner Jam Recovery
Job Level
Page Level
Alarms
Alarm Control
Cartridge Alarm
Timeouts
Sleep Mode
Disabled
1–60 min
Timeouts
Hibernate Timeout
Disabled
1–3 hours
6 hours
1–3 days
1–2 weeks
1 month
Timeouts
Screen Timeout
15–300 sec
To
Specify whether image background removal is allowed in copy,
e‑mail, or FTP jobs.
Note: On is the factory default setting. The background of the
image will be removed.
Specify how a scan job should be reloaded if a paper jam occurs in
the ADF.
Note: Job Level is the factory default setting.
Set an alarm when the printer requires operator intervention.
When activated, Alarm Control lets you set the number of times
that the alarm sounds, while Cartridge Alarm lets you stop printing
when a cartridge‑low condition occurs.
For each alarm type, select from the following options:
•
Off
•
Single
•
Continuous
Notes:
• Single is the factory default setting for Alarm Control. This
sounds three quick beeps.
• Off is the factory default setting for Cartridge Alarm. This
means no alarm will sound.
• Continuous repeats three beeps every 10 seconds.
Set the amount of time the printer waits after a job is printed before
it goes into a reduced power state.
Notes:
• "30 min" is the factory default setting.
•
Disabled appears only when Energy Conserve is set to Off.
•
Lower settings conserve more energy, but may require
longer warm‑up times.
•
Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warm‑up time.
Set the printer to operate at a low power state.
Notes:
•
Disabled is the factory default setting for Class A and Class B
printers except in European Union countries, Canada, and
Switzerland.
• "3 days" is the factory default setting for Class B printers in
all European Union countries and Switzerland.
Set the amount of time in seconds the printer waits before
returning the display to the Ready state.
Note: "30 sec" is the factory default setting.
102