Set Date And Time Menu - Lexmark CX310 User Manual

Understanding the printer menus
Use
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7

Set Date and Time menu

Use
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
Enable NTP
On
Off
To
Specify how audit logs are configured.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
• Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
• Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
• If the security audit log is activated, then the severity value of each event is
recorded. 4 is the factory default setting.
To
View the current date and time settings for the printer.
Enter the date and time.
Notes:
•
Manually setting the date and time sets Enable NTP to No.
•
The wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM format.
Select the time zone.
Note: GMT is the factory default settings.
Set the printer to use the applicable daylight saving time (DST) start and end times
associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
• On is the factory default setting.
•
This setting is turned off if you manually set the date and time.
99