Network Card Menu; Tcp/Ip Menu - Lexmark CX310 User Manual

Cx310 series
Hide thumbs Also See for CX310:
Table of Contents

Advertisement

Understanding the printer menus

Network Card menu

To access the menu, navigate to either of the following:
Network/Ports > Standard Network > Standard Network Setup > Network Card
Network/Ports > Network [x] > Network [x] Setup > Network Card
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0, 10–225 seconds

TCP/IP menu

To access the menu, navigate to either of the following:
Network/Ports > Standard Network > Standard Network Setup > TCP/IP
Network/Ports > Network [x] > Network [x] Setup > TCP/IP
Note: This menu is available only in network printers or printers attached to print servers.
Use
Set Hostname
IP Address
Netmask
Gateway
Enable DHCP
On
Off
Enable RARP
On
Off
To
View the connection status of the network card.
View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value between 1 and 9 is selected, then Invalid appears on the
display, and the value is not saved.
To
Set the current TCP/IP host name.
Note: This can be changed only from the Embedded Web Server.
View or change the current TCP/IP address.
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.
View or change the current TCP/IP netmask.
View or change the current TCP/IP gateway.
Specify the DHCP address and parameter assignment.
Note: On is the factory default setting.
Specify the RARP address assignment setting.
Note: Off is the factory default setting.
92

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx211Cx231

Table of Contents