Solving Printer Problems - Lexmark CX310 User Manual

Troubleshooting
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the
message and continue printing. For non‑touch‑screen printer models, press
Weblink server not set up. Contact system administrator.
From the printer control panel, press
Note: If the message appears again, then contact your system support person.

Solving printer problems

Basic printer problems
The printer is not responding
Action
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Step 2
Check if the printer is in Sleep mode or Hibernate mode.
Is the printer in Sleep mode or Hibernate mode?
Step 3
Check if one end of the power cord is plugged into the printer and the
other to a properly grounded electrical outlet.
Is the power cord plugged into the printer and a properly grounded
electrical outlet?
Step 4
Check other electrical equipment plugged into the electrical outlet.
Does other electrical equipment work?
to clear the message.
to confirm.
Yes No
Go to step 2. Turn on the printer.
Press the Sleep button Go to step 3.
to wake the printer
from Sleep mode or
Hibernate mode.
Go to step 4. Plug one end of the
power cord into the
printer and the other to
a properly grounded
electrical outlet.
Unplug the other Go to step 5.
electrical equipment,
and then turn on the
printer. If the printer
does not work, then
reconnect the other
electrical equipment.
192