Lexmark CX310 User Manual page 101

Understanding the printer menus
Use
ADF Loaded Beep
Enabled
Disabled
Quiet Mode
Off
On
Run Initial setup
Yes
No
Paper Sizes
US
Metric
Scan to PC Port Range
[port range]
Home screen customization
Change Language
Copy
E‑mail shortcuts
FTP shortcuts
Search Held Jobs
Held jobs
Bookmarks
Jobs by user
One Page Copy
Off
On
To
Specify a custom beep when paper is loaded in the ADF.
Note: Enabled is the factory default setting.
Reduce the amount of noise produced by the printer.
Notes:
•
Off is the factory default setting. This supports the
performance specifications for your printer.
•
On configures the printer to produce as little noise as
possible. This is best suited for printing text and line art.
•
For optimal printing of color‑rich documents, set Quiet Mode
to Off.
•
Selecting Photo from the printer driver may disable Quiet
Mode and provide better print quality and full‑speed
printing.
Run the setup wizard.
Notes:
•
Yes is the factory default setting.
•
After completing the setup wizard by selecting Done at the
country or region selection screen, the default becomes No.
Specify the default system of measurement for paper sizes.
Notes:
•
US is the factory default setting.
• The initial setting is determined by your country or region
selection in the initial setup wizard.
Specify a valid port range for printers behind a port blocking
firewall. The valid ports are specified by two sets of numbers
separated by a semicolon.
Note: 9751:12000 is the factory default setting.
Change the icons and buttons that appear on the home screen.
For each icon or button, select from the following options:
Display
Do not display
Notes:
•
Display is the factory default setting for Copy, E‑mail, FTP,
Search Held Jobs, and Held jobs.
•
"Do not display" is the factory default setting for Change
Language, E‑mail shortcuts, FTP shortcuts, Bookmarks, and
Jobs by user.
Set copies from the scanner to one page at a time.
Note: Off is the factory default setting.
101