Codec Configuration - ATCOM AT820 User Manual

AT820 Series User Manual
K. Register Expires: Set register expires time. Default to 300s. AT820 will auto
configure this expires time to the server recommended setting if it is different from
the SIP server.
L. Subscribe Expires: Set subscribe expires time. Default to 3600s.
M. Transport Type: UDP/TCP/TLS.
N. SIP 100Rel Require: Whether to enable SIP 100rel require function or not. When set
as "No", the phone will support PRACK selectively which means the phone can dial
out successfully no matter the UAS support PRACK or not. But for "Yes", the phone
will ask for supporting PRACK by the strong hand, and then the phone can't dial out
successfully if the UAS does not support PARCK.
O. Session Timer Enable: Whether to enable session timer extension for this account.
Default is no.
P. Early Update Enable: this parameter control the account to support receiving Early
Update.
Q. CallerID Display: this parameter is used to supported the P-Asserted-Identity
header.
R. AutoSubscribeMWI Enable: Enable this account to subscribe for message summary
automatically.
S. Server List: the SIP server list supported, can be common or Broadsoft, default to
common.
T. DNS mode: enable the account to use DNS SRV query. Default to no which use DNS
A query.
U. Request URI: the Broadworks BLF uri to request.

5.4.2 Codec Configuration

A. G711A: enable or disable G711A codec support in this account.
B. G711U: enable or disable G711U codec support in this account.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
30