Line; Features - ATCOM AT820 User Manual

AT820 Series User Manual
the given date. In that case, the <day> value must not be negative.
If<weekday >is not zero, then the daylight saving starts or ends on the
<weekday >on or after the given date if <day> is positive, or on or before the
given date if <day> is negative. If <day> is -1, it means the <weekday> on or
before the end-of-the-month (in other words the last occurrence of <weekday>
in that month).
Optional values inside [] are assumed to be 0 if they are not specified. Midnight
means 0:0:0 of the given date.
E.G. start=4/1/7/8:00:00;end=10/1/7/9:00:00;save=-1
Start time is 1st April, Sunday, 8:00:00 am.
End time is 1st October, Sunday, 9:00:00 am.
The display time will be 1 hour early than the standard time.
B. Manual
1. Set Local Date (YYYY/mm/dd): Manually set local date.
2. Set Local Time (HH:mm:ss): Manually set local time.
In manual mode, IP phone will resume to the manual time value after a reboot or
power off.

5.5.2 Line

Set name for each line showed on LCD, if keep it as blank, it will use phone SIP account
user ID as short name. If set the two lines' account as the same account, both line can
make calls by using one account, but the other account is equal to be forbidden, and it
can answer incoming calls only with the first line.

5.5.3 Features

5.5.3.1 Speed Dial
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
36