Account; Sip - ATCOM AT820 User Manual

AT820 Series User Manual
B. Stun Server: Set a stun server to contact for NAT mapping discovery.

5.4 Account

5.4.1 SIP

A. Enable: Whether to enable this sip register or not.
B. Display Name: This name will display on the screen. When making outgoing calls, the
callee will show the display name on its screen.
C. User ID: Set user ID for sip account.
D. Authenticate ID: Normally is the same with User ID, can also leave it as blank. If the
server has requirements on it, set it as required!
E. Password: Set password for sip account.
F. SIP Server: Set SIP server, supports both IP address and domain name.
G. SIP Port: Set SIP server port. Default to 5060.
H. Use Outbound Proxy: Whether to use outbound proxy or not.
I. Outbound Proxy Server：Normally the Proxy server is the same as SIP server. If they
are different then fill in the correct information that provided by ISP.
J. Outbound Proxy Port: Set outbound proxy server port.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
29