Feet Installation Instruction; Desktop Position - ATCOM AT820 User Manual

AT820 Series User Manual
C. Configure SIP parameters:
1. Click on "admin" at the top right corner of the webpage to enter administrator
mode. The default username is admin for administrator and user for user, no
passwords were set for them, but user can set password in the webpage.
2. Select Account item.
3. Configure the parameters refers to Account/SIP.

1.11 Feet installation instruction

1.11.1 Desktop position

Put the bottom side of the IP phone upside and press the plate with letter "PUSH" into
the slot, please refer the picture as below:
A. Press the other plate into the slot in accordance with the direction of the arrow.
B. Repeat A and B. It is the right picture of putting on desk after fixing the two feet
below:
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
11