Advance - ATCOM AT820 User Manual

AT820 Series User Manual

5.2.2 Advance

5.2.2.1 Web Server
A. Enable Web Server: Enable or disable the web server. If set this item as "No", user
will can't access the webpage. User can recover this function from the MENU: "9
Network"-> "7 Enable Web Server" or factory reset.
B. Admin Password: Set admin webpage access password, the default username for
admin webpage is admin.
C. User Password: Set user webpage access password, the default username for user
webpage is user.
D. HTTP Port: Set port for HTTP, the default is 80. If modify it, user will have to input
http://ip-address:port to open the interface again. For example, the AT820's IP is
"192.168.1.201", and HTTP port was set as 8080. Then user has to type
"http://192.168.1.201:8080" in web browser to enter AT820's webpage.
5.2.2.2 VPN
A. VPN Enable: Whether enable VPN or not.
B. VPN Type: Do not support L2TP VPN with IPsec authentication.
C. Server address: Set VPN server address.
D. Username: Set VPN account's username.
E. Password: Set VPN account's password.
After applying the changes, the phone will reboot. The VPN IP will show on the System
Status page.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
25