Static Dhcp Edit; Ip/Mac Binding Exempt List - ZyXEL Communications UAG4100 User Manual

Chapter 20 IP/MAC Binding

20.2.2 Static DHCP Edit

Click Configuration > Network > IP/MAC Binding > Edit to open the IP/MAC Binding Edit
screen. Click the Add or Edit icon to open the following screen. Use this screen to configure an
interface's IP to MAC address binding settings.
Figure 129 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
Table 95 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL
Interface Name
IP Address
MAC Address
Description
OK
Cancel

20.3 IP/MAC Binding Exempt List

Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the UAG
does not apply IP/MAC binding.
Figure 130 Configuration > Network > IP/MAC Binding > Exempt List
196
DESCRIPTION
This field displays the name of the interface within the UAG and the interface's IP address
and subnet mask.
Enter the IP address that the UAG is to assign to a device with the entry's MAC address.
Enter the MAC address of the device to which the UAG assigns the entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For example, you
may want to list the computer's owner.
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving.
UAG4100 User's Guide