The One-Time Schedule Add/Edit Screen - ZyXEL Communications UAG4100 User Manual

Chapter 34 Schedules

34.2.1 The One-Time Schedule Add/Edit Screen

The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
click either the Add icon or an Edit icon in the One Time section.
Figure 215 Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 162 Configuration > Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
Date Time
StartDate
StartTime
StopDate
StopTime
OK
Cancel
316
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
Specify the year, month, and day when the schedule begins.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
• Hour - 0 - 23
• Minute - 0 - 59
Specify the year, month, and day when the schedule ends.
• Year - 1900 - 2999
• Month - 1 - 12
• Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
• Hour - 0 - 23
• Minute - 0 - 59
Click OK to save your changes back to the UAG.
Click Cancel to exit this screen without saving your changes.
Section 34.2 on page 315), and
UAG4100 User's Guide