The Usb Storage Screen - ZyXEL Communications UAG4100 User Manual

Chapter 6 Monitor
Table 28 Monitor > System Status > UPnP Port Status (continued)
LABEL
Internal Client
Internal Client
Type
Description
Delete All
Refresh

6.10 The USB Storage Screen

This screen displays information about a connected USB storage device. Click Monitor > System
Status > USB Storage to display this screen.
Figure 48 Monitor > System Status > USB Storage
The following table describes the labels in this screen.
Table 29 Monitor > System Status > USB Storage
LABEL
Device description
Usage
Filesystem
Speed
72
DESCRIPTION
This field displays the DNS host name or IP address of a client on the LAN. Multiple NAT
clients can use a single port simultaneously if the internal client field is set to
255.255.255.255 for UDP mappings.
This field displays the type of the client application on the LAN.
This field displays a text explanation of the NAT mapping rule.
Click this to remove all mapping rules from the NAT table.
Click this button to update the information in the screen.
DESCRIPTION
This is a basic description of the type of USB device.
This field displays how much of the USB storage device's capacity is currently being
used out of its total capacity and what percentage that makes.
This field displays what file system the USB storage device is formatted with. This field
displays Unknown if the file system of the USB storage device is not supported by the
UAG, such as NTFS.
This field displays the connection speed the USB storage device supports.
UAG4100 User's Guide