ZyXEL Communications UAG4100 User Manual page 46

Chapter 4 Quick Setup Wizards
Figure 31 WAN and ISP Connection Settings: (PPTP Shown)
The following table describes the labels in this screen.
Table 11 WAN and ISP Connection Settings
LABEL
ISP Parameter
Encapsulation
Authentication
Type
User Name
Password
Retype to
Confirm
Nailed-Up
46
DESCRIPTION
This section appears if the interface uses a PPPoE or PPTP Internet connection.
This displays the type of Internet connection you are configuring.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your UAG accepts either CHAP or PAP when requested by this remote
node.
CHAP - Your UAG accepts CHAP only.
PAP - Your UAG accepts PAP only.
MSCHAP - Your UAG accepts MSCHAP only.
MSCHAP-V2 - Your UAG accepts MSCHAP-V2 only.
Type the user name given to you by your ISP. You can use alphanumeric and -_
characters, and it can be up to 31 characters long.
Type the password associated with the user name above. Use up to 64 ASCII characters
except the [] and ?. This field can be blank.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
@$./
UAG4100 User's Guide