Disassembly Of Power Button P.c.b - Panasonic SA-XH50P Service Manual

10.7. Disassembly of Power Button
P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Front Panel Assembly".
Step 1 Remove 2 screws.
Step 2 Lift up Power Button P.C.B. as direction of arrow
Caution: During assembling, ensure that Power Button
P.C.B. is fully catched.
Step 3 Release 3P wire from wall & ribs of Front Panel.
Caution: During assembling, ensure that 3P wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
Step 4 Desolder 3P wire at the cable holder (H901) on Power
Button P.C.B..
Step 5 Remove Power Button P.C.B..
51