Disassembly Of Power Button P.c.b - Panasonic SA-XH70PH Service Manual

Step 6 Desolder the 3P Cable at the cable holder (H902) on
Panel P.C.B..
Step 7 Remove the Panel P.C.B..
Caution: During assembling, ensure that both the 5P wire
& 17P FFC are dressed as diagram shown.
12.8. Disassembly of Power Button
P.C.B.
• Refer to "Disassembly of Top Cabinet".
• Refer to "Replacement of Tray Ornament".
• Refer to "Disassembly of Front Panel Block Assembly".
Step 1 Remove 1 screw.
Step 2 Lift up the Power Button P.C.B. as direction of arrow.
Caution: During assembling, ensure that the Power Button
P.C.B. is located properly and fully seated onto the Front
Panel Block Assembly.
53