1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Home Theater System
  5. SA-XH20PH
  6. Service manual

Panasonic SA-XH20PH Service Manual

Dvd home theater sound system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Note: Please refer to the original service manual for:
DVD Mechanism Unit (BRS1D), Order No. PSG1012001CE
Speaker system SB-XH70GS-K, Order No. PSG1202009CE

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.2. Before Repair and Adjustment ------------------------- 4
1.3. Protection Circuitry ---------------------------------------- 4
1.4. Caution For Fuse Replacement------------------------ 4
1.5. Safety Part Information----------------------------------- 5
2 Warning -------------------------------------------------------------- 6
2.2. Precaution of Laser Diode------------------------------- 7
3 Service Navigation ----------------------------------------------11
3.1. Service Information -------------------------------------- 11
4 Specifications ----------------------------------------------------12
4.1. Others (Licences)-----------------------------------------13
DVD Home Theater Sound System
Model No.
Product Color: (K)...Black Type
PAGE
5 General/Introduction------------------------------------------- 14
5.1. Power-Saving Features -------------------------------- 14
5.2. Disc Information ------------------------------------------ 15
5.3. DivX Information------------------------------------------ 17
6.2. Main Unit Key Button Operations -------------------- 19
7 Installation Instructions -------------------------------------- 20
7.1. Speaker Connections ----------------------------------- 20
7.2. Radio Antenna Connection ---------------------------- 21
8 Operating Instructions ---------------------------------------- 22
9 Service Mode ----------------------------------------------------- 24
9.1. Cold-Start -------------------------------------------------- 24
9.2. Panel Code Setting Operation ------------------------ 24
9.3. Self Diagnostic-------------------------------------------- 27
© Panasonic Corporation 2012. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
SA-XH20PH
PSG1204015CE
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SA-XH20PH

Summary of Contents for Panasonic SA-XH20PH

  • Page 1: Table Of Contents

    3.1. Service Information -------------------------------------- 11 9.1. Cold-Start -------------------------------------------------- 24 4 Specifications ----------------------------------------------------12 9.2. Panel Code Setting Operation ------------------------ 24 4.1. Others (Licences)-----------------------------------------13 9.3. Self Diagnostic-------------------------------------------- 27 © Panasonic Corporation 2012. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 9.4. Error Code ------------------------------------------------- 32 19.2. Illustration of ICs, Transistor and Diode----------- 115 9.5. Sales Demonstration Lock Function ---------------- 34 19.3. Terminal Function of ICs ------------------------------ 116 9.6. Firmware Version-Up Information -------------------- 35 20 Exploded View and Replacement Parts List---------- 119 10 Troubleshooting Guide---------------------------------------- 37 20.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 4: Before Repair And Adjustment

    1.2. Before Repair and Adjustment Disconnect AC power to discharge unit AC Capacitors as such (C5702, C5703, C5704, C5705, C5706) through a 10 Ω, 10 W resis- tor to ground. Caution: DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent.

  • Page 5: Safety Part Information

    1.5. Safety Part Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 6: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip”...

  • Page 7: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode Caution: This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 655 nm (DVD)/790 nm (CD) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings: 1.

  • Page 8: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).

  • Page 9: Handling Precautions For Traverse Unit

    2.4. Handling Precautions for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1.
  • Page 10 Grounding for electrostatic breakdown prevention 2.4.2. Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electric- ity in the working environment. Proceed servicing works under the working environment where grounding works is completed. 2.4.2.1.

  • Page 11: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 12: Specifications

    4 Specifications Laser power CLASS 1 Audio output (Disc) Main unit Number of channels 5.1 ch (FL, FR, C, SL, SR, SW) AMPLIFIER SECTION RMS Output Power: Dolby Digital Mode VIDEO SECTION Front Ch Video system NTSC 55 W per channel (5 Ω), 1 kHz, 10% THD Composite video output Surround Ch 1 Vp-p (75 Ω)

  • Page 13: Others (Licences)

    4.1. Others (Licences)

  • Page 14: General/Introduction

    5 General/Introduction 5.1. Power-Saving Features...

  • Page 15: Disc Information

    5.2. Disc Information 5.2.1. Media that can be played...
  • Page 16 5.2.2. File Extension Type Support (MP3/JPEG/DivX)

  • Page 17: Divx Information

    5.3. DivX Information...

  • Page 18: Location Of Controls And Components

    6 Location of Controls and Components 6.1. Remote Control Key Button Operations...

  • Page 19: Main Unit Key Button Operations

    6.2. Main Unit Key Button Operations...

  • Page 20: Installation Instructions

    7 Installation Instructions Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC power supply cord until all other connections are completed. 7.1. Speaker Connections...

  • Page 21: Radio Antenna Connection

    7.2. Radio Antenna Connection...

  • Page 22: Operating Instructions

    8 Operating Instructions 8.1. Removing of disc during abnormality 8.1.1. Using main unit key buttons. 8.1.1.1. When the power can be turned off. 1. Turn off the power and press & hold [OPEN/CLOSE] button on main unit and [SKIP FWD] button on remote for 5 seconds 8.1.1.2.
  • Page 23 3. Gently pull out the tray. 4. Remove the disc...

  • Page 24: Service Mode

    9 Service Mode 9.1. Cold-Start Here is the procedure to carry out cold-start for initialize to shipping mode. 1. Unplug AC power cord 2. Press & hold [ ] button 3. Plug AC power cord while [ ] button being pressed FL Display will show “_ _ _ _ _ _ _ _”...
  • Page 25 Product Series Country Region Broadcasting Selected Region Display Code OSD Menu Language Code System TV System (Default) Default USA, Canada, English (NA), Spanish (NA), P, PC, PX, NTSC AUTO2 (*A) English US Military Canadian French (blank) Japan NTSC AUTO2 (*A) Japanese Japanese, English English (EU), French, German,...
  • Page 26 9.2.2. Setting of Panel Code Step 1 Press [OPEN/CLOSE] button on main unit, follow by [4] and [7] on remote control (to enter Doctor Mode). Step 2 Press [CANCEL] button on remote control, then press [2], [2], [8] and [0] on remote control. Step 3 Key in new panel code using remote control (refer to Figure 9.2.2).

  • Page 27: Self Diagnostic

    9.3. Self Diagnostic By pressing various button combinations on the main unit and remote control unit, you can activate the various service modes for checking. Special Note: • Due to the limitations of the no. characters that can be shown on the FL Display, the “FL Display” button on the remote control unit can be used to show the two display pages.
  • Page 28 9.3.2. Self Diagnostic Table 2 (For DVD) Item Key Operation FL Display Mode Name Description Front Key DVD laser DVD laser drive current measurement. In STOP (no disc) mode, drive current For DVD laser drive current, refer to press [OPEN/CLOSE] measurement Troubleshooting Guide (Section 10.2) button on the main unit,...
  • Page 29 9.3.3. Self Diagnostic Table 3 (For DVD) Item Key Operation FL Display Mode Name Description Front Key Micro-processor Micro-processor firmware version In STOP (no disc) (Display 1) firmware version display & EEPROM checksum display. mode, press display & EEPROM checksum is only available [OPEN/CLOSE] button on EEPROM due to existence of EEPROM IC.
  • Page 30 9.3.4. Self Diagnostic Table 4 (For DVD) Item Key Operation FL Display Mode Name Description Front Key Region and DVD firmware version is displayed on In STOP (no disc) Firmware the FL Display. mode, press version display [OPEN/CLOSE] button on the main unit, and [8] button on the remote control unit.
  • Page 31 9.3.5. Self Diagnostic Table 5 Item Key Operation FL Display Mode Name Description Front Key Press & hold Self-Diagnostic To enter into self-diagnostic checking [OPEN/CLOSE] on main Mode unit, follow by [4] then [9] on remote control. (When no disc in tray) Error code will display Error code System will perform a check on...

  • Page 32: Error Code

    9.4. Error Code 9.4.1. Error Code Table 1 Error Diagnosis Description of error Automatic FL Display Remarks Code Contents The abnormalities In normal operation, when DCDET2 goes to Press [OPEN/CLOSE] in the Power Amp L, immediately PCNT is set to L (not normal on main unit for next output or power POWER OFF sequence), and Error Code...
  • Page 33 9.4.2. Error Code Table 2 Error Diagnosis Description of error Automatic FL Display Remarks Code Contents Tray loading error The tray opening and closing is abnormal. Press [OPEN/CLOSE] on CLOSE and OPEN of the tray cannot be main unit for next error. carried out properly.

  • Page 34: Sales Demonstration Lock Function

    9.5. Sales Demonstration Lock Function This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function. “LOCKED” is displayed on the unit, and ordinary operation is disabled. 9.5.1. Setting • Prohibiting removal of disc 1.

  • Page 35: Firmware Version-Up Information

    9.6. Firmware Version-Up Information 9.6.1. Process Flow (1/2) Item FL/ GUI Display Remarks Process Description Collect ROM Step 1 Display 1: User can put both files Files Unzip the firmware update file. into the same root (Copy files into Step 2 directory.
  • Page 36 9.6.2. Process Flow (2/2) Item FL/ GUI Display Remarks Process Description To initialize, press and hold GUI Display 1.3: Update Completed main unit [OPEN/CLOSE] If firmware software update then press remote control completes successfully: key [ 10]. GUI Display 1.3: "Firmware update is completed, please open the tray and remove the disc."...

  • Page 37: Troubleshooting Guide

    10 Troubleshooting Guide 10.1. Troubleshooting Guide for F61 and/or F76 This section illustrates the checking procedures when upon detecting the error of “F61” and/or “F76” after power up of the unit. It is for purpose of troubleshooting and checking in SMPS P.C.B.. Symptom(s) Checking items Possible Fault(s)
  • Page 38 10.1.1. SMPS P.C.B. AC Inlet Jack : P5701 Regulator IC : Thermal Diode : Photocoupler : IC2900 D5706 PC701 Fuse : F1 Connector : H2016 H2016 Transformer : T5701 Fig. 1. SMPS P.C.B.
  • Page 39 10.1.2. Main P.C.B (Side A of Main P.C.B.) Transistor:Q100 D114 Chip Jumper:K105 Chip Jumper:K304 Chip Jumper:K102 (Side B of Main P.C.B.) DC/DC CONVERTER IC: IC106 Inductors : L125 Connector:CN100 IC107 Transistor:Q107 Connector:CN203 Fig. 2. Main P.C.B.

  • Page 40: Dvd/Cd Laser Diode Current Measurement

    10.2. DVD/CD Laser Diode current measurement This section will illustrate proceddures of measuring & deriving DVD/CD Laser Diode Current. Item Description Checking Item/Formula Remarks 1. Measurement the voltage (V ) on the testpoints CL8530(+) & CL8531(-). Refer to 10.2.1. CD Laser Diode Current Measurement Backend P.C.B.
  • Page 41 10.2.1. Backend P.C.B. (Side A of Backend P.C.B.) R8566 R8556 (Side B of Backend P.C.B.) CL8530, CL8531, CL8532 Fig. 3. Backend P.C.B.

  • Page 42: Basic Troubleshooting Guide For Traverse Unit (Backend P.c.b.)

    10.3. Basic Troubleshooting Guide for Traverse Unit (Backend P.C.B.) Problems Checking Points Checking components 1) Distorted picture or a) Check SDRAM address, data IC8051 abnormal sound is head bus, CLK and other control signals during the initialization waveform b) Check video signals (CVBS) LB8317, R8325 (IC8011 Pin 63) c) Check audio DAC circuitry LB8422 till LB8428...

  • Page 43: Basic Troubleshooting Guide For Hdmi Av Output

    10.4. Basic Troubleshooting Guide for HDMI AV output Problems Checking Points Checking components 1) TV does not have any 1) Check setting of the set in * This year HDMI always ON. display. Set FL display shows Setup Menu whether the HDMI No need to check Setup Menu.

  • Page 44: Service Fixture & Tools

    11 Service Fixture & Tools Prepare service tools before process service position. Ref. No Service Tools Remarks SFT1 Main P.C.B. (CN201) - Backend P.C.B. (FP8101) RFKZXH150PK2 (50P FFC)

  • Page 45: Disassembly And Assembly Instructions

    12 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...

  • Page 46: Disassembly Flow Chart

    12.2. Disassembly Flow Chart Main Unit 12.4. Top Cabinet 12.5. Tray Ornament 12.17. DVD Mechanism 12.6. Front Panel Block 12.9. Rear Panel Unit (BRS1D) Assembly 12.10. SMPS P.C.B. 12.18. Traverse Unit 12.7. Panel P.C.B. 12.11. Current Limiting 12.8. Power Button Switch (Q5701) P.C.B.

  • Page 47: Main Components And P.c.b. Locations

    12.3. Main Components and P.C.B. Locations...

  • Page 48: Disassembly Of Top Cabinet

    12.4. Disassembly of Top Cabinet Step 4 Slightly lift both sides of the Top Cabinet in an outward direction about 30°. Step 1 Remove 2 screws. Step 2 Remove 3 screws. Step 5 Press the catches and remove the Top Cabinet as arrow shown in sequence.

  • Page 49: Replacement Of Tray Ornament

    Caution: During assembling, ensure that the Top Cabinet 12.5. Replacement of Tray Ornament is inserted into the Front Panel Block Assembly. Step 1 Use a Paper Clip and insert into the hole on the bottom of the unit. Step 2 Push the Paper Clip sideway in the direction of the arrow to eject Tray.
  • Page 50 Step 3 Slide the Tray out as direction of arrow. Step 6 Remove the Tray Ornament in the direction of arrow. Caution: During assembling, ensure that the Tray Orna- ment’s guide rib is properly inserted onto the Tray. Step 4 Upset the Unit. Step 5 Release 2 catches.

  • Page 51: Disassembly Of Front Panel Block Assembly

    Step 7 Slide the Tray in fully. 12.6. Disassembly of Front Panel Block Assembly • Refer to “Disassembly of Top Cabinet”. • Refer to “Replacement of Tray Ornament”. Step 1 Detach 5P Wire at the connector (FP9001) on Backend P.C.B.. Step 2 Detach 17P FFC at the connector (CN203) on Main P.C.B..

  • Page 52: Disassembly Of Panel P.c.b

    Step 5 Release 3 tabs at the Bottom Chassis. Step 6 Remove the Front Panel Block Assembly. Caution: Do not exert strong force when releasing the tabs. 12.7. Disassembly of Panel P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Replacement of Tray Ornament”. •...
  • Page 53 Step 3 Release the 3P Cable from the ribs of Front Panel Block Step 6 Desolder the 3P Cable at the cable holder (H902) on Assembly. Panel P.C.B.. Caution: During assembling, ensure the 3P Cable is Step 7 Remove the Panel P.C.B.. inserted properly into the ribs of the Front Panel Block Assembly as diagram shown.

  • Page 54: Disassembly Of Power Button P.c.b

    12.8. Disassembly of Power Button Step 3 Release the 3P Cable from the ribs of the Front Panel Block Assembly. P.C.B. Caution: During assembling, ensure that 3P Cable is prop- erly dressed into the ribs of the Front Panel Block Assem- •...

  • Page 55: Disassembly Of Rear Panel

    12.9. Disassembly of Rear Panel 12.10. Disassembly of SMPS P.C.B. • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Top Cabinet”. Step 1 Remove 8 screws. Step 1 Remove 1 screw. Step 2 Release tabs of each side of the Rear Panel in the direction of arrow.

  • Page 56: Replacement Of Current Limiting Switch (Q5701)

    Step 3 Remove 4 screws. Caution: Replace the Bottom PC Sheet if broken. Ensure that it is pasted on the Bottom Chassis properly. 12.11. Replacement of Current Limit- Step 4 Lift up to remove the SMPS P.C.B.. ing Switch (Q5701) Caution: Handle the SMPS P.C.B.

  • Page 57: Replacement Of Diode (D5706)

    Step 2 Remove 1 screw from the Current Limiting Switch Step 4 Solder pins of the Current Limiting Switch (Q5701) on (Q5701). the solder side of the SMPS P.C.B.. Step 3 Remove the Current Limiting Switch (Q5701) from the Heatsink Ext A. Caution: Avoid touching Heatsink Ext A due to its high temperature after prolonged use.

  • Page 58: Disassembly Of Main P.c.b

    Step 2 Remove 1 screw from the Diode (D5706). Step 4 Solder pins of the Diode (D5706) on the solder side of Step 3 Remove the Diode (D5706) from the Heatsink Ext B. the SMPS P.C.B.. Caution: Avoid touching Heatsink Ext B due to its high temperature after prolonged use.
  • Page 59 Step 3 Detach 12P Cable at the connector (CN100) on Main Step 7 Slightly lift up to remove the Main P.C.B.. P.C.B.. Step 4 Detach 17P FFC at the connector (CN203) on Main P.C.B.. Step 5 Detach 50P FFC at the connector (CN201) on Main P.C.B..

  • Page 60: Replacement Of Digital Amplifier Ic (Ic403/ Ic404/Ic405)

    12.14. Replacement of Digital Ampli- Step 3 Lift up Main P.C.B. as arrow shown. Caution: Keep the Heatsink Spacers in safe place. Avoid fier IC (IC403/IC404/IC405) denting it, place it back during assembling. • Refer to “Disassembly of Top Cabinet”. •...
  • Page 61 12.14.2. Assembly of Digital Amplifier IC Step 5 Upset the Main P.C.B.. Step 6 Fix 3 screws. (IC403/IC404/IC405) Note: For assembling of Digital Amplifier IC (IC404) & (IC405), Step 1 Fix the Digital Amplifier IC (IC403) onto the Main P.C.B.. repeat the (Step 1) to (Step 6) of 12.14.2.

  • Page 62: Disassembly Of Backend P.c.b

    12.15. Disassembly of Backend P.C.B. Step 9 Remove 2 screws. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Component Video P.C.B.”. Step 1 Remove 8 screws. Step 2 Release 2 tabs at each side of the Rear Panel in the direction of arrow.

  • Page 63: Disassembly Of Component Video P.c.b

    12.16. Disassembly Component Caution: During assembling, ensure that the Component Video P.C.B. is inserted properly and fully catched onto the Video P.C.B. rear panel. • Refer to “Disassembly of Top Cabinet”. Step 1 Remove 1 screw. Step 2 Lift up the Component Video P.C.B.. Step 3 Detach 11P FFC at the connector (CN400) on Compo- nent Video P.C.B..

  • Page 64: Disassembly Of Dvd Mechanism Unit (Brs1D)

    12.17. Disassembly of DVD Mecha- Step 5 Slightly lift up and remove the DVD Mechanism Unit (BRS1D) in the direction of arrow. nism Unit (BRS1D) Caution: During assembling, ensure that the DVD Mecha- nism Unit (BRS1D) is inserted properly and fully seated on •...

  • Page 65: Replacement Of Traverse Unit

    12.18. Replacement of Traverse unit Step 2 : Slide the tray out fully. • Refer to “Disassembly of DVD Mechanism Unit (BRS1D)”. Caution: Refer to 2.4 “Handling Precaution for Traverse Unit” to prevent static damage to the Optical Pickup unit. Note: 1.
  • Page 66 Step 4 : Release the guide as shown & slide the Traverse Slide Step 6 : Lift up the Traverse Unit by approximately 45°. Plate to the end. Step 7 : Slide out the traverse unit as arrow shown. Step 5 : Release the 24P FFC from the slot. Caution : Avoid touching the surface of the OPU in the traverse unit.
  • Page 67 12.18.2. Assembly of Traverse Unit Step 2 : Insert the Traverse unit at approximately 45° into the mecha chassis as arrow shown. Step 1 : Release the guide as shown & slide the Traverse Slide Plate to the end.
  • Page 68 Step 3 : Insert the Traverse Unit into the grooves. Step 5 : Insert the 24P FFC into the slot. Caution : Ensure that the 24P FFC are properly inserted into the slots as shown. Step 6 Slide the Traverse Slide Plate until it stop at the Guide. Step 4 : Slide the Traverse Slide Plate to lock the Traverse Unit as shown.
  • Page 69 Step 7 Align and insert the grooves of the Tray into the Guides Step 9 Slide the tray in fully. as shown. Step 8 Align the guides of the Traverse Slide Plate with the groove when sliding the tray in.

  • Page 70: Service Position

    13 Service Position Note: For description of the disassembly procedures, see 13.2. Checking & Repairing of SMPS the Section 12. P.C.B. 13.1. Checking & Repairing of Panel Step 1 Remove Top Cabinet. P.C.B. Step 2 Remove SMPS P.C.B.. Step 3 Place the SMPS P.C.B. on the insulated material. Step 1 Remove Top Cabinet.

  • Page 71: Checking & Repairing Main P.c.b

    13.3. Checking & Repairing Main Step 6 Upset the Main P.C.B. and place it onto the insulated material. P.C.B. Step 7 Proceed to check and repair side A of Main P.C.B.. 13.3.1. Checking & Repairing Main P.C.B. (Side A) Step 1 Remove Top Cabinet. Step 2 Remove Main P.C.B..
  • Page 72 Step 4 Lift up the Main P.C.B. as arrow shown. Step 5 Place the Main P.C.B. back to original position. Step 6 Connect 12P Cable at the connector (CN100) on Main P.C.B.. Step 7 Connect 17P FFC at the connector (CN203) on Main P.C.B..

  • Page 73: Checking & Repairing Of Backend P.c.b

    13.4. Checking & Repairing of Back- Step 4 Remove 2 screws. end P.C.B. 13.4.1. Checking & Repairing of Backend P.C.B. (Side B) Step 1 Remove Top Cabinet. Step 2 Remove Component Video P.C.B.. Step 3 Connect 11P FFC at the connector (FP8301) on Back- end P.C.B..

  • Page 75: Overall Simplified Block Diagram

    14 Overall Simplified Block Diagram TUNER MAIN BLOCK FRONT L HDMI D-IN FRONT R MCLK,BCLK,SRCK SURR L Video HDMI SURR R Buffer FLASH Zoran 976 CENTER SELECTOR SDRAM +5.3V SUBWOOFER Motor Driver UART +5.3V DIGITAL AMP (TI Solution) MICROPROCESSOR PCONT,ECO CTL DC-DET DVD Mechanism (BRS1D) Vref 3.3V...

  • Page 76: Block Diagram

    REV 7 FROM/TO SYSTEM CONTROL FP8252 FP8101 CN201 CLOSE SW CLOSE SW CLOSE SW CLOSE SW FP8101 CN201 FP8252 OPEN SW OPEN SW OPEN SW OPEN SW NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH20PH BACKEND BLOCK DIAGRAM...

  • Page 77: Ic Terminal Chart

    MDQ 4 MDQ 5 MDQ 6 MDQ 7 MDQ 8 MDQ 9 DQ10 MDQ 10 DQ10 DQ11 MDQ 11 DQ11 DQ12 MDQ 12 DQ12 DQ13 MDQ 13 DQ13 DQ14 MDQ 14 DQ14 DQ15 MDQ 15 DQ15 SA-XH20PH IC TERMINAL CHART...

  • Page 78: System Control

    CN203 CN901 KEY1 KEY1 H902 H901 KEY1 KEY1 90 FROM/TO SYNC SYNC SYNC POWER SUPPLY Z901 DC DET1 REMOTE CONTROL DC DET1 DCDET1 SENSOR CN203 CN901 USB OC USB OC USB OC RMT 3 3.3V SA-XH20PH SYSTEM CONTROL BLOCK DIAGRAM...

  • Page 79: Audio & Video

    BST D VALID JK401 VALID 7 RST AB OUT D SUBWOOFER JK401 17 RST CD OUT C BST C DC DETECT DC DET2 DC DET2 23.5V CIRCUIT Q114,Q116,Q500,Q501 FROM DC DET2 DC DET2 POWER SUPPLY SA-XH20PH AUDIO & VIDEO BLOCK DIAGRAM...

  • Page 80: Power Supply

    Q5841 D402 DC DETECT DC DET2 DC DET2 AUDIO & VIDEO DZ5701 TH5702 D110 D111 D112 D115 Q105 Q106 PRIMARY SECONDARY DC DETECT DC DETECT NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH20PH POWER SUPPLY (1/2) BLOCK DIAGRAM...
  • Page 81 VREF VREF VREF 3.3V CN203 CN901 PW FL- PW FL+ CN203 CN901 PW -VP CN203 CN901 CN203 CN901 3.3V 3.3V PW 3.3V D 3.3V 3.3V NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH20PH POWER SUPPLY (2/2) BLOCK DIAGRAM...

  • Page 82: Wiring Connection Diagram

    TO uP DOWNLOADER AC IN (SIDE B) SMPS P.C.B. T2900 SURROUND 110V-240V SWITCHING (SOLDER SIDE) 50/60Hz TRANSFORMER CN100 7 6 5 4 FRONT H2016* SPEAKERS CENTER SUBWOOFER NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH20PH WIRING CONNECTION DIAGRAM...

  • Page 83: Schematic Diagram

    17 Schematic Diagram 17.1. Schematic Diagram Notes • Voltage and signal line : +B signal line • This schematic diagram may be modified at any time : -B signal line with the development of new technology. : Audio output signal line Notes: : Video output signal line S901:...

  • Page 85: Backend Circuit

    R8321 R8322 JK8301 VGND VGND R8325 C2823 L2802 R8326 LB8317 VIDEO OUT 100P J0JBC0000015 VIDEO (YEL) JK8001 C8030 6.3V33 DIGITAL AUDIO IN OPT-IN (OPTICAL) TO BACKEND CIRCUIT (2/5) PW_D+3R3V L8001 R8025 G1C100M00049 OPT_IN TO BACKEND CIRCUIT (4/5) SA-XH20PH BACKEND CIRCUIT...
  • Page 86 UART_RX C8051 OPEN_SW OPEN SW CLOSE_SW CLOSE_SW VBUS_EN IC8051 VBUS_EN USB_OC C8055 C3ABPG000163 USB_OC AMUTE 64M SDRAM AMUTE ADGND MIC_IN MIC_IN VGND VGND iPod_VIDEO iPod_SW TO BACKEND TO BACKEND CIRCUIT (1/5) CIRCUIT (3/5) TO BACKEND CIRCUIT (5/5) SA-XH20PH BACKEND CIRCUIT...
  • Page 87 C8024 C8622 1000P R3910 L8552 R8621 X8621 G1C100M00049 R8622 220K H0J270500131 K8301 R8311 C8621 1000P L8302 PW_VDDP_HDMI G1C100M00049 C8006 100P C8029 1000P LB3902 TO BACKEND J0JHC0000045 C8028 0.01 CIRCUIT (2/5) LB3901 J0JHC0000045 PW_DAC LB8301 J0JHC0000045 C8301 6.3V100 SA-XH20PH BACKEND CIRCUIT...
  • Page 88 FOR FIRMWARE +3.3V VOLTAGE REGULATOR +1.8V VOLTAGE SUPPLY REGULATOR DUPRDO DOWNLOAD DGND DGND 1.8V R8103 C8113 FP8002 C8101 VDD_3R3V DUPTDI R8104 DUPTDI FOR FIRMWARE DUPRDI CL8101 DUPRDI R8101 DEBUG 270K DGND DOWNLOAD DOWNLOAD C8112 C8111 R8102 130K DGND SA-XH20PH BACKEND CIRCUIT...
  • Page 89 TO OPTICAL PICKUP UNIT VC(REF) (DVD MECHANISM UNIT BRS1D) LB8531 C8533 IC3954 R8016 RF_E C0JBAR000433 R8538 2CH MULTIPLEXER DVD_MD R8531 VR-CD LB3907 LB8561 R8532 J0JCC0000308 VR-DVD PW_VDDP_HDMI J0JDC0000102 CD-LD LB8551 SPDIF_SW J0JDC0000102 SELECT DVD-LD GND-LD CD_MD C3958 R3908 GPIO34 SA-XH20PH BACKEND CIRCUIT...

  • Page 90: Main Circuit

    AGND CN202 PW_3.3VREF VREF BUSY BUSY CLOCK CLOCK LB200 TO uP DOWNLOADER LB201 C214 VOUT 0.47 SYS5VGND DGND RESET PW_SYS6V CNVSS CNVSS STBY IC202 C205 0.47 C0DBGYY02930 +3.3V VOLTAGE REGULATOR RESET C219 0.01 TO MAIN CIRCUIT (5/8) SA-XH20PH MAIN CIRCUIT...
  • Page 91 C411 C401 OPEN_SW R400 OPEN SW CLOSE_SW CLOSE_SW VBUS_EN C453 VBUS_EN 0.01 USB_OC USB_OC AMUTE AMUTE ADGND C451 K105 MIC_IN C452 L427 VGND VGND J0JBC0000014 R435 iPod_VIDEO iPod_SW K158 TO MAIN CIRCUIT (3/8) TO MAIN CIRCUIT (6/8) SA-XH20PH MAIN CIRCUIT...
  • Page 92 DVD_TX C202 R233 DVD_RX R222 RX201 150K D1H81014A024 CNVSS R201 FLD_STB CLOSE_SW CK_FLD ECO_CNTRL FLD_OUT R232 SYNC RESET TUN_INT TUN_SCLK X201 H2D500400006 TUN_SDIO TUN_REST LED_CTRL R294 R239 R223 TO MAIN 1.2K CIRCUIT (2/8) TO MAIN CIRCUIT (7/8) SA-XH20PH MAIN CIRCUIT...
  • Page 93 C523 C509 0.01 PWM_D PVDD_D C519 PVDD_D 25V330 C455 L409 0.01 G0A100H00018 R452 C510 0.033 SP_FR+ BST_D R506 R453 GVDD_C GVDD_D SP_SL- C190 1000P C433 C432 C431 C567 C514 1000P K157 R454 CHASSIS TO MAIN CIRCUIT (8/8) SA-XH20PH MAIN CIRCUIT...
  • Page 94 220P 680P C309 680P TV_R R311 C312 AUX_L TUN-LCH R307 C313 R309 R310 TUN-RCH R308 C314 IC300 C0JBAR000367 AUDIO SELECTOR C315 C317 C316 R317 Q301 B1GBCFJJ0041 R315 SELECTOR SWITCH R312 R313 R318 R316 Q300 B1GBCFJJ0041 SELECTOR SWITCH SA-XH20PH MAIN CIRCUIT...
  • Page 95 C124 R191 C133 AUX_L R192 1.5M R186 R185 R183 AUX_DET +VCC Q122 IC100 B1ABCF000231 C0ABBB000067 DETECT SWITCH DUAL OP-AMP Q124 C109 -VCC B1GBCFGN0018 BUFFER SWITCH R190 R187 Q123 1.5M AUX_R B1GBCFGN0018 C121 R188 C110 BUFFER SWITCH C195 SA-XH20PH MAIN CIRCUIT...
  • Page 96 D203 B1ABCF000231 G0A330G00016 DZ2J07500L DC DETECT Q100 C135 R152 0.01 B1DGDC000002 C198 R150 C142 C138 C141 C143 C129 SWITCH 25V4.7 0.47 25V470 SYS5VGND K107 D116 K104 Q101 B0JCPG000028 PW_SW5V_D K106 B1GBCFJJ0041 PCONT SWITCH PW_SW5V_ADC K102 R196 K101 SA-XH20PH MAIN CIRCUIT...
  • Page 97 PVDD_D C554 25V330 PVDD_D L405 G0A100H00018 SP_SR+ R461 C550 0.033 BST_D PW_+12V R462 GVDD_C GVDD_D C439 C437 C551 C438 C441 K303 16V33 PW_PVDD_D R463 C802 C803 C512 HEATSINK* NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH20PH MAIN CIRCUIT...

  • Page 98: Panel And Power Button Circuit

    IN SCHEMATIC R950 DGND DIAGRAM - 1 DGND R951 LB950 R952 POWER BUTTON CIRCUIT CHASSIS : +B SIGNAL LINE H901 S902 DGND POWER KEY1 VREF_LED SA-XH20PH PANEL / POWER BUTTON CIRCUIT NOTE: “ * ” REF IS FOR INDICATION ONLY...

  • Page 99: Smps Circuit

    R2908 C5725 DZ2J36000L C2912 D2906 16V33 16V820 25V100 6.3V100 B0EAMM000057 R5735 C5727 C5726 1000P 0.33 R5731 R5729 R5730 4.7K IC5702 C0DBZMC00006 SHUNT REGULATOR TO SMPS R5817 CIRCUIT (2/2) NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH20PH SMPS CIRCUIT...
  • Page 100 D5704 B0JCME000035 C5719 0.22 OPTMR ZA5703* R5724 HEATSINK 180K C5720 C5715 0.01 IC5701 C0DBZYY00448 SWITCHING MODE POWER SUPPLY CONTROL D5705 TH5701 B0BC02700039 R5723 D4CC11040013 TO SMPS CIRCUIT (1/2) NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH20PH SMPS CIRCUIT...

  • Page 101: Component Video Circuit

    10V100 VGND [PR] R_C_VOUT C4027 100P VGND G_Y_VOUT C4014 R4014 L4004 COMPONENT VIDEO OUT BACKEND CIRCUIT 10V100 B_C_VOUT (FP8301) IN SCHEMATIC C4028 100P DIAGRAM - 1 TV_RIN C4015 R4015 L4005 10V100 ADGND [PB] TV_LIN C4029 100P SA-XH20PH COMPONENT VIDEO CIRCUIT...

  • Page 102: Printed Circuit Board

    C8024 R8255 R8256 IC8111 R8253 R8254 D8101 L8251 C8252 D8102 L8252 R8259 FL8103 C9006 FL8101 R8260 FL8104 FP8252 IC9006 LB9002 FP9001 (TO LOADING PCB (DVD MECHANISM FP8101 UNIT BRS1D)) 0680C 0680C 0680C 0680C (SIDE A) (SIDE B) SA-XH20PH BACKEND P.C.B.

  • Page 103: Main P.c.b

    C214 C189 C501 C502 C132 R142 R530 C187 R195 C191 R157 R156 C197 Q100 C522 C523 C192 D114 C186 C198 Q101 C181 C182 C472 C183 C184 C129 C473 C185 C486 C135 K109 C512 0729B 0729B (SIDE A) SA-XH20PH MAIN P.C.B.
  • Page 104 C476 R435 C424 30 32 SUBWOOFER R469 C412 L418 R442 C411 1-SW+ RX404 RX405 IC106 R411 C410 C415 R404 R444 C479 X400 R443 C425 C505 C420 R445 C138 C413 L419 C441 L125 C143 0729B 0729B (SIDE B) SA-XH20PH MAIN P.C.B.

  • Page 105: Panel, Power Button And Component Video P.c.b

    S902 R950 (POWER) W933 CN901 SENSOR PORT COMPONENT VIDEO P.C.B. (REP4767A) CN4000 C4028 JK4000 4-PB 2-PR 1-GND 0736B 0736B COMPONENT VIDEO OUT NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH20PH PANEL / POWER BUTTON / COMPONENT VIDEO P.C.B.

  • Page 106: Smps P.c.b

    C2912 Q2900 R5702 T5701 C5705 W1039 W1033 (MAIN TRANSFORMER) H2016* R5704 R5703 0730B 0730B CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH20PH SMPS P.C.B.

  • Page 107: Appendix Information Of Schematic Diagram

    STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8051 REF NO. MODE HDMI STANDBY IC8051 REF NO. MODE HDMI STANDBY SA-XH20PH BACKEND P.C.B.
  • Page 108 MODE POWER ON STANDBY IC8606 REF NO. MODE HDMI STANDBY IC8651 REF NO. MODE HDMI STANDBY IC9006 REF NO. MODE CD PLAY STANDBY Q8552 REF NO. MODE HDMI STANDBY Q8562 Q8565 REF NO. MODE CD PLAY STANDBY SA-XH20PH BACKEND P.C.B.
  • Page 109 POWER ON STANDBY REF NO. IC200 MODE POWER ON STANDBY REF NO. IC200 MODE POWER ON STANDBY REF NO. IC200 MODE POWER ON STANDBY REF NO. IC201 MODE POWER ON STANDBY REF NO. IC202 MODE POWER ON STANDBY SA-XH20PH MAIN P.C.B.
  • Page 110 REF NO. MODE CD PLAY 12.0 STANDBY 12.0 IC404 REF NO. MODE CD PLAY 12.0 12.0 12.0 10.1 20.3 20.3 20.3 10.2 10.2 20.3 20.3 STANDBY 12.0 12.0 12.0 10.1 20.3 20.3 20.3 10.2 10.2 20.3 20.3 SA-XH20PH MAIN P.C.B.
  • Page 111 REF NO. Q106 Q107 Q114 Q116 Q122 MODE POWER ON 12.1 10.0 20.6 STANDBY 12.1 10.0 20.6 REF NO. Q123 Q124 Q500 Q501 MODE POWER ON 10.3 10.3 STANDBY 10.3 10.3 REF NO. Q300 Q301 MODE SELECTOR STANDBY SA-XH20PH MAIN P.C.B.
  • Page 112 -24.9 -24.9 -24.9 -24.9 -24.9 -24.9 -24.9 -13.3 -25.0 -25.5 -11.1 -25.1 -22.9 -22.9 -22.9 -22.9 -22.9 -22.9 -22.9 -22.9 REF NO. IC901 MODE POWER ON -22.9 -22.8 STANDBY -22.9 -22.8 SA-XH20PH PANEL P.C.B. 19.1.7. SMPS P.C.B. IC2900 REF NO. MODE POWER ON 20.1 12.1 STANDBY 20.1 12.1...
  • Page 113 19.1.8. Waveform Table (1/2) 1.5Vp-p(50nsec/div) 2Vp-p(50nsec/div) 0.4Vp-p(200usec/div) 0.06Vp-p(2usec/div) 1.25Vp-p(2usec/div) 0.15Vp-p(2usec/div) 0.05Vp-p(2usec/div) 2Vp-p(20nsec/div) 1Vp-p(20nsec/div) 3.2Vp-p(500nsec/div) 3.6Vp-p(500nsec/div) 6Vp-p(1usec/div) 6Vp-p(500nsec/div) 6Vp-p(1usec/div) 32Vp-p(1usec/div) 6Vp-p(1usec/div) 6Vp-p(1usec/div) 32Vp-p(1usec/div) 6Vp-p(1usec/div) 32Vp-p(1usec/div)
  • Page 114 19.1.9. Waveform Table (2/2) 0.4Vp-p(200usec/div) 4.8Vp-p(2usec/div) 1.25Vp-p(50usec/div) 5Vp-p(1usec/div) 2Vp-p(20nsec/div)

  • Page 115: Illustration Of Ics, Transistor And Diode

    19.2. Illustration of ICs, Transistor and Diode C0ABBB000067 (8P) C0DBAYY00927 (8P) C0DBAYH00005 C0DBGYY02930 C0DBZMC00006 C0GBY0000117 C0DBZYY00311 C0DBEYY00175 (8P) C0DBEYY00215 C0DBZYY00448 (8P) C0EBE0000504 C0FBAK000026 (16P) C0JBAR000367 (16P) C1AB00003217 (44P) C3ABPG000163 (54P) No.1 C3EBFY000030 (8P) RFKWFXH170E (8P) C0JBAR000433 C0HBB0000057 (44P) C1AB00003477 (128P) VUEALLPT040 RFKWMXH70EB B1ABDF000026...

  • Page 116: Terminal Function Of Ics

    19.3. Terminal Function of ICs 19.3.1. IC200 (RFKWMXH70EB): IC MICRO- Pin No. Terminal Name I/O Function No Connection PROCESSOR No Connection +3.3V System Supply No Connection Pin No. Terminal Name I/O Function System Ground CLOSE_SW Close Switch for Mechanism No Connection ECO_CONTRL O Control Voltage Supply of D-AMP for NRST O ADC Reset...
  • Page 117 19.4. IC901 (C0HBB0000057): IC FL Display Driver Terminal Name Function USB RIP LED No Connection No Connection No Connection No Connection Oscillator Input DOUT No Connection Data Input Clock Input Serial Interface Strobe Key Data Input 1 (No Connec- tion) Key Data Input 2 (No Connec- tion) Power Supply (+5V)

  • Page 119: Exploded View And Replacement Parts List

    *HEATSINK CN901 (MAIN P.C.B.) *CN951 EXT A *H2016 CN203 (POWER BUTTON P.C.B.) CN100 CN202 (SMPS P.C.B.) CN950 T2900 (PANEL P.C.B.) ZJ5701 FL901 H901 SA-XH20PH-K CABINET DRAWINGS NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY.
  • Page 120 20.1.2. Packaging ACCESSORIES BAG AC CORD A1-1 OI BOOK SA-XH20PH FM INDOOR ANTENNA VIDEO CABLE SB-XH70GS AC PLUG ADAPTOR F R O N T POLYFOAM (LEFT) POLYFOAM (RIGHT) SC-XH20PH-K PACKAGING DRAWINGS...
  • Page 121 20.1.3. Mechanical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks RMQ1742 HIMELON SHEET Description RMZX1022 HEATSINK SPACER CABINET RWJA003200XX CABLE WIRE CHASSIS (PANEL-POWER BUTTON) REEX1241 COMPO- XTB3+10JFJ SCREW NENT VIDEO-BACK-...

  • Page 122: Electrical Replacement Parts List

    20.2. Electrical Replacement Parts List Safety Ref. Part No. Part Name & Qty Remarks Description IC8251 C0GBY0000117 Safety Ref. Part No. Part Name & Qty Remarks IC8606 C0EBE0000504 Description IC8651 RFKWFXH170E PRINTED CIRCUIT IC9006 C0DBZYY00311 BOARDS TRANSISTORS PCB1 REP4757G BACKEND P.C.B (RTL) PCB2 REP4756ET...
  • Page 123 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description D203 DZ2J07500L DIODE L2802 J0JBC0000015 INDUCTOR D402 DA2J10100L DIODE L2900 G0A330G00016 CHOKE COIL D901 DZ2J02400L DIODE L5701 G0B722G00002 LINE FILTER D2901 DZ2J36000L DIODE...
  • Page 124 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description IR SENSOR W933 D0GBR00JA008 1/10W W940 D0GBR00JA008 1/10W Z901 B3RAB0000081 IR SENSOR RESISTORS THERMISTORS LB8531 D0GA220JA023 1/16W TH5701 D4CC11040013 THERMISTOR LB8691 D0GA101JA023 1/16W...
  • Page 125 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R250 D0GB221JA008 1/10W R464 D0GB3R3JA008 1/10W R272 D0GBR00JA008 1/10W R465 D0GB3R3JA008 1/10W R282 D0GBR00JA008 1/10W R466 D0GB3R3JA008 1/10W R283 D0GBR00JA008 1/10W R467 D0GB3R3JA008...
  • Page 126 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R2906 ERJ3RBD303V 1/16W R8326 D0GBR00JA008 1/10W R2907 D0HB392ZA002 3.9K 1/16W R8401 D0GAR00J0005 1/16W R2908 D0GB103JA008 1/10W R8402 D0GA101JA023 1/16W R2909 D0GB102JA008 1/10W R8404...
  • Page 127 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C139 F1K1C1050005 C430 F1H1H104B055 0.1uF C140 F1H1H100A017 10pF C431 F1H1H104B055 0.1uF C141 F1H1C474A179 0.47uF C432 F1H1H104B055 0.1uF C142 F2A1E4R7B384 4.7uF C433 F1J1C106A059 10uF...
  • Page 128 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C558 F1H1H104B055 0.1uF C5729 F1H1H103B047 0.01uF C559 F1H1H104B055 0.1uF C5843 F1H1C105A095 C566 F1H1H102B047 1000pF C8001 EEE0GA331WP 330uF C567 F1H1H102B047 1000pF C8002 F1G1A1040006 0.1uF...
  • Page 129 Safety Ref. Part No. Part Name & Qty Remarks Description FL8101 F1H0J1050018 6.3V FL8102 F1H0J1050018 6.3V FL8103 F1H0J1050018 6.3V FL8104 F1J1E1040022 0.1uF SERVICE FIXTURE & TOOLS SFT1 RFKZXH150PK2 50P FFC (MAIN TO BACKEND) MMH1204...

Table of Contents