Self Diagnostic Function-Error Code - Panasonic SA-XH50P Service Manual

7.4.

Self Diagnostic Function-Error Code

7.4.1. Mechanism Error Code Table (BRS1D)
Error
Diagnosis Contents
Code
H01 Tray loading error
H03 Traverse motor error
U11 Focus servo error
7.4.2. DVD Module Error Code Table
Error
Diagnosis Contents
Code
U702 HDMI/DVI I2C
communication error
U703 HDMI/DVI attestation
error
U704 HDMI/DVI SRM
Error
U705 HDMI/DVI SRM disk
falsification check
error
F899 The communication
specification
disagreement
between
micro-processor
Description of error
The tray opening and closing is abnormal.
CLOSE and OPEN of the tray cannot be
carried out properly. Loading motor error,
DV5 LSI IC (IC8001) error.
The traverse is abnormal. (Traverse servo,
DV5 LSI IC (IC8001), TRV motor error.)
Focus coil, FE signal error. Disc may be
dirty.
Description of error
The communication error of I2C when
connecting it with HDMI/DVI. For
instance, when EDID information to which
information on the TV set side has been
described cannot be read, it is generated.
When attestation (HDCP) with the TV
side fails when connecting it with
HDMI/DVI, it is generated.
It is generated at the equipment to which
the TV set is connected with HDMI/DVI.
It is generated at the time of it is time
when illegal the SRM data of the
reproducing disk (verify error), when
connecting it with HDMI/DVI.
Unsuitable combination of number of
system com and panel com used.
(Firmware)
Automatic FL Display
Automatic FL Display
31
Remarks
Press [OPEN/CLOSE] on
main unit for next error.
(OPEN time: OPEN
CLOSE OPEN
H01 at CLOSE: CLOSE
OPEN CLOSE H01)
Press [OPEN/CLOSE] on
main unit for next error.
Press [OPEN/CLOSE] on
unit for next error.
main
(Unfinalized DVD-R
is likely to become
U11.)
Remarks
Press [OPEN/CLOSE ] on
main unit for next error. .
Press [OPEN/CLOSE ] on
main unit for next error. .
] on
Press [OPEN/CLOSE
main unit for next error. .
] on
Press [OPEN/CLOSE
main unit for next error. .
] on
Press [OPEN/CLOSE
main unit for next error. .