Panasonic SA-XH50P Service Manual page 26

7.2.2. Service Mode Table 2 (For DVD)
Item
Mode Name
DVD laser DVD laser drive current measurement.
drive current For DVD laser drive current, refer to
measurement Troubleshooting Guide (Section 8.2)
CD laser drive CD laser drive current measurement.
current For CD laser drive current, refer to
measurement Troubleshooting Guide (Section 8.2)
Region display Region code display, TV broadcasting
system & the model no. information.
Note: Refer to Figure 7.1 for "Video
Design Information".
Description
FL Display
DVD laser current
measurement mode
The value denotes the current in decimal
notation.
(Display 1)
CD laser current
measurement mode
N: NTSC / 6: PAL60
N: no PAL / P: PAL
Region No.: 0-8
26
Key Operation
Front Key
In STOP (no disc) mode,
press [OPEN/CLOSE]
button on the main unit,
and [FUNCTIONS] button
on the remote control unit.
To exit, press Power Off
Button on remote control.
In STOP (no disc) mode,
press [OPEN/CLOSE]
button on the main unit,
and [3] button on the
remote control unit.
To exit, press Power Off
Button on remote control.
In STOP (no disc)
mode, press
[OPEN/CLOSE] button on
the main unit, and [6]
Model
button on the remote
No.
control unit.
Information
Display is automatically
clear after 5 seconds.