Self-Diagnostic And Special Mode Setting; Cold-Start; Service Mode Table - Panasonic SA-XH50P Service Manual

7 Self-Diagnostic and Special Mode Setting

7.1.

Cold-Start

Here is the procedure to carry out cold-start for initialize to shipping mode.
1. Unplug AC power cord
2. Press & hold [POWER] button
3. Plug AC power cord while [POWER] button being pressed
FL Display will show "_ _ _ _ _ _ _ _"
4. Release [POWER] button
7.2.

Service Mode Table

By pressing various button combinations on the main unit and remote control unit, you can activate the various service modes for
checking.
Special Note:
• Due to the limitations of the no. characters that can be shown on the FL Display, the "FL Display" button on the remote control
unit can be used to show the two display pages. (Display 1 / Display 2).
• Refer to Section 5.1 for the section on "Remote Control Key Buttons Operations".
24