Disassembly Of Power Button P.c.b - Panasonic SCXH70 Service Manual

Step 3 Desolder 3P cable at the cable holder (H903) on Vol-
ume Button P.C.B..
Step 4 Remove Volume Button P.C.B..
Caution: During assembling, ensure that Volume Button
P.C.B. is properly located & fully seated onto Front Panel.
Caution: During assembling, ensure that 3P cable is dress
properly.
8.17. Disassembly of Power Button
P.C.B.
• Follow (Step 1) to (Step 6) of Item 8.3.
• Follow (Step 1) to (Step 6) of Item 8.14.
Step 1 Remove 2 screws.
Step 2 Release 2 catches on Power Button P.C.B..
Caution: During assembling, ensure that Power Button
P.C.B. is fully catched.
Step 3 Lift up Power Button P.C.B..
Step 4 Desolder 3P cable at the cable holder (H901) on Power
Button P.C.B..
Step 5 Remove Power Button P.C.B..
57