Firmware Version-Up Information - Panasonic SA-XH50P Service Manual

7.6.

Firmware Version-Up Information

7.6.1. Process Flow (1/2)
Process
1
Collect ROM
Step 1
Files
Unzip the filmware update file.
(Copy files into
Step 2
CD-R/RW)
Burn below files into root folder of
the CD disc.
Step 3
1. update.ver
2. build.img
3. mupdate.ver
4. XH150_045.bin
Notes:
1. Software update files =
"mupdate.ver" & "XH150_045.bin"
2. Firmware update files =
"update.ver" & "build.img"
2 Load disc into
Step 1
unit
Power on main unit.
(To update rate)
Step 2
Change selector to CD/DVD mode
(default is DVD/CD mode)
Step 3
Load in the disc with software/
firmware update data.
Step 4
Use remote control to select "OK"
button and press remote control
[OK] key.
Item
Description
After disc reading, GUI will
display as:
"GUI Display 1.1:
Are you sure you want to
update the firmaware?"
Wait about 15~20 min to finish
update process.
After disc reading, GUI will
display as:
"GUI Display 1.2:
Updating in progress. Please
wait...Please do not turn off
power during update."
FL will display in the sequence
of " WRITE C", "WRITE D",
" WRITE E", "WRITE F" and
"WRT ROM2" as FL display
1.1~1.5 shown.
FL/ GUI Display
Display 1:
GUI Display 1.1:
GUI Display 1.2:
FL Display 1.1:
FL Display 1.2:
FL Display 1.3:
FL Display 1.4:
FL Display 1.5:
34
Remarks
User can put both files
into the same root
directory. DVD MODEL
will choose the right
ROM files to update
its firmware.
All panel keys and
remote controller keys,
including [POWER] key,
are invalid during CD
Update.
Caution: Make sure the
power supply during CD
update. If the power supply
cable is unplugged during
update stage, CD update
will fail. The DVD model
can't work, and can't be
recovered by CD update
again.