Panasonic SA-XH50P Service Manual page 68

Step 12 Remove Backend P.C.B. Shield Plat Unit.
Caution : During assembling, ensure that Backend P.C.B.
Shield Plate Unit is properly inserted and fully seated onto
Backend P.C.B..
Caution : During assembling, replace the B/E Heat Radia-
tor if torn. Ensure that B/E Heat Radiator is properly
located & fully pasted within embossing on Backend P.C.B
Shield Plate
Caution: During assembling, ensure that Backend P.C.B. is
properly located & fully seated onto Bottom Chassis.
68