Selecting An Input Channel - Fluke 190-502/AM User Manual

Selecting an Input Channel

To select an input channel, do the following:
Press the required channel key (A...D):
A
B
- the channel is turned on
C
- labels for the F1...F4 keys are
shown. Press the channel key again
D
to turn the labels off/on (toggle).
- the channel key illumination is turned
on
If the channel key is illuminated, the
mV
RANGE and MOVE UP/DOWN keys
MOVE
RANGE
are now assigned to the indicated
channel.
V
To assign the RANGE and MOVE up
down keys to multiple channels, keep
one channel key pressed, then press
another channel key.
Shop for Fluke products online at:
To set multiple channels to the same range
(V/div) as, for example, input A, do the following:
−
Select the input A measurement function,
probe setting and input options for all
involved channels
−
press and hold
−
press
−
release
Notice that all pressed keys are illuminated now.
The MOVE UP/DOWN key and the RANGE
mV/V key applies to all involved input channels.
MyFlukeStore
www. .com
Using the Scope and Meter
Selecting an Input Channel
Tip
A
B C
and/or and/or
A
1.877.766.5412
1
D
17