About this Chapter
This chapter provides a step-by-step introduction to the
recorder functions of the test tool. The introduction gives
examples to show how to use the menus and perform
basic operations.
Opening the Recorder Main Menu
First choose a measurement in scope or meter mode. Now
you can choose the recorder functions from the recorder
main menu. To open the main menu, do the following:
1
Open the recorder main menu.
RECORDER
(See Figure 19).
Shop for Fluke products online at:
Using The Recorder Functions
Trendplot Meter is only present in models 190-xx2.
MyFlukeStore
www.
.com
Chapter 2
Figure 19. Recorder Main Menu
1.877.766.5412
41