Changing The Auto Set Options - Fluke 190-502/AM User Manual

Fluke 190 Series II
Users Manual
To turn on the display again do one of the following:
•
Press any key. The Display Auto-Off timer starts again
and the display will be turned off when the time has
elapsed.
•
Connect the power adapter; the Auto-Off timer is
inactive now.
92
www.
Shop for Fluke products online at:

Changing the Auto Set Options

With the next procedure you can choose how auto set
behaves when you press the
1
USER
2
F1
3
ENTER
If the frequency range is set to > 15 Hz, the Connect-and-
View function responds more quickly. The response is
quicker because the test tool is instructed not to analyze
low frequency signal components. However, when you
measure frequencies lower than 15 Hz, the test tool must
be instructed to analyze low frequency components for
automatic triggering:
MyFlukeStore
1.877.766.5412
.com
- (auto set) key.
AUTO MANUAL
Display the key labels.
USER
Open the menu.
USER OPTIONS
Open the menu.
AUTO SET ADJUST