Fluke 190-502/AM User Manual page 81

Saving Screens with Associated Setups
To save for example a screen+setup in Scope mode, do
the following:
1 Display the
SAVE
From this point the screen is frozen.
2 Open the
F1
Observe the number of available
and used memory locations.
In METER mode the
will be shown now as only a
setup+screen can be saved, see
step 4.
Shop for Fluke products online at:
key labels.
SAVE
menu.
SAVE
menu
SAVE AS
MyFlukeStore
www.
3 Select the target memory INT
F1
(internal memory) or USB (USB
device).
Observe the new
select USB.
4 Select Screen+Setup and open
the
ENTER SAVE AS
Below Save As: the default name +
serial number and OK SAVE are
already selected.
To modify the name for this
particular Screen+Setup or to
modify the default name see below
'Editing Names'.
5 Save the Screen+setup.
ENTER
To resume your measurements press
1.877.766.5412
.com
5
Using Memory and PC
Saving and Recalling
menu if you
SAVE
menu.
HOLD
.
RUN
73