Table of Contents
Advertisement
4
Select the positive pulse icon to
trigger on a positive pulse, then
ENTER
jump to Condition:
5
Select >t, then jump to Update:
ENTER
6
Select On Trigger and exit the
menu.
ENTER
The test tool is now prepared to trigger on pulses that are
more than a selectable time in duration. Observe that the
trigger menu at the bottom of the screen has been
adapted to set the pulse condition:
To set the pulse width to 110 ms, continue as follows:
7
Enable the arrow keys to adjust
F1
the pulse width.
8
Select 110 ms.
Shop for Fluke products online at:
Figure 34. Triggering on Missing Pulses
MyFlukeStore
www.
.com
Triggering on Waveforms
Triggering on Pulses
1.877.766.5412
4
69
Advertisement
Table of Contents
