Using The Cord Cover - Gateway Personal Computer User Manual

Chapter 3: Getting Started

Using the cord cover

After you have the power cord and peripheral device cables connected to your computer,
you can install the optional cord cover to make your computer look less cluttered.
To install the optional cord cover:
Align the tabs on the top of the cover with the slots above the back ports, then
■
swing the cord cover's bottom tabs into the slots on the bottom of the computer
(view shown from below for clarity).
Tips & Tricks
To remove the cord cover:
■ Press the cord cover's bottom tabs inward, then rotate the cord cover away from
the computer.
24
If you have difficulty sliding the cover's bottom tabs into the computer
slots, press the bottom corners of the cord cover inward while
pressing the cord cover into place.
www.gateway.com