Gateway Personal Computer User Manual page 84

Chapter 7: Upgrading Your Computer
3
If you are removing a memory module from the memory module bank, gently pull
the plastic tabs away from the sides of the memory module and remove it.
- OR -
If you are adding a memory module to an empty memory module bank, gently pull
the plastic tabs away from the sides of the memory module bank.
4
Align the notch on the new memory module with the notch on the memory module
bank and press firmly into the bank. The tabs on the sides of the memory module
should secure the memory module automatically. When the module is secure, you
hear a click.
5
Close the case by following the instructions in
6
Turn on your computer. Windows starts and the Windows desktop appears.
7
Click ,
Start
Click
System
the System Properties window in the General tab.
78
, then click
Control Panel
. The amount of memory in your computer is shown at the bottom of
www.gateway.com
"Closing the case" on page
Performance and Maintenance
72.
(if in Category View).