Gateway Personal Computer User Manual page 82

Chapter 7: Upgrading Your Computer
10
Make sure that the jumpers on the new drive are set the same as the drive you are
replacing.
11
Insert the new drive into the drive cage and secure it with the four screws removed
earlier.
12
Connect the drive cable and power cable to the drive.
13
Slide the drive cage into the computer until it clicks into place.
14
Close the case by following the instructions in
15
For instructions on installing Windows, your drivers, and your applications, see the
Using Gateway System Recovery online guide you printed in
76
"Closing the case" on page
www.gateway.com
72.
Step 2.