Connecting The Modem; Connecting To A Wired Ethernet Network - Gateway Personal Computer User Manual

Connecting the modem

Your computer may have the optional 56K modem that you can use to connect to a
standard telephone line.
Warning
To connect the modem:
1
Insert one end of the modem cable into the modem jack
computer.
2
Insert the other end of the modem cable into a telephone wall jack. The modem will
not work with digital or PBX telephone lines.
3
Start your computer, then start your communications program.

Connecting to a wired Ethernet network

Your computer has a network jack that you can use to connect to wired Ethernet network.
For information about setting up a wired or wireless Ethernet network, see
Your Computer" on page
To connect to a wired Ethernet network:
1
Insert one end of the network cable into the network jack
computer.
2
Insert the other end of the network cable into a network jack.
Tips & Tricks
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
49.
You can use your computer's Ethernet jack for more than just
networking. Many broadband Internet connections, such as cable
modems and DSL modems, connect to your computer's Ethernet
jack. For more information, see "Using the Internet" in Using Your
Computer which has been included on your hard drive. To access
this guide, click Start, All Programs, then click Gateway
Documentation.
www.gateway.com
Connecting the modem
on the back of your
"Networking
on the back of your
33