Table of Contents
Advertisement
CHAPTER 4: Installing Components
34
Lift the locking tab (3) on the back of the optical drive tray, then push the
7
optical drive (4) and tray out of the bay.
Lift the optical drive (5), then pull it from the tray (6).
8
Unscrew the two screws (5) holding the optical drive interface board on
9
the back of the optical drive, then remove the interface board.
Using the two screws you just removed, attach the optical drive interface
10
board to the back of the new optical drive.
www.gateway.com
Advertisement
Table of Contents
Troubleshooting
