Gateway E-9525R User Manual page 21

www.gateway.com
You must support the server while
installing or removing the front and back
mounting screws. If the server is not
supported, damage to the server or injury
Attach one mounting nut to each of the two back cabinet posts where you
6
plan to install the server.
Warning
Hold the server in place in the cabinet and swing the hinged back rail
7
mounting brackets into alignment with the mounting nuts, then secure
the back in place with two mounting screws (one on each side).
may result.
Mounting nut
Back cabinet post
Mounting screw
Mounting your server into a cabinet
Hinged back rail
mounting bracket
15