No Security - ZyXEL Communications P-870H Series User Manual

Chapter 7 Wireless LAN
Table 21 Network > Wireless LAN > General
LABEL
Hide Network
Name (SSID)
Disable WMM
Advertise
BSSID
Security
Mode
MAC Filter
Apply
Reset

7.4.1 No Security

Select No Security to allow wireless devices to communicate with the access
points without any data encryption or authentication.
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 45 Wireless LAN > General: No Security
90
DESCRIPTION
Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
WMM (Wi-Fi MultiMedia) QoS (Quality of Service) allows you to prioritize
wireless traffic according to the delivery requirements of individual
services. To do this, you must enable WMM QoS on all wireless devices in
your network.
Select this option to not broadcast the WMM information in beacon frames
and disable WMM QoS on the ZyXEL Device.
This shows the MAC address of the wireless interface on the ZyXEL Device
when wireless LAN is enabled.
See the following sections for more details about this field.
Click this button to go to the MAC Filter screen to configure whether the
wireless devices with the MAC addresses listed are allowed or denied to
access the ZyXEL Device using this SSID.
Click this to save your changes back to the ZyXEL Device.
Click this to reload the previous configuration for this screen.
P-870H/HW Series User's Guide