ZyXEL Communications P-870H Series User Manual page 36

Chapter 2 Tutorials
Verify the profile settings in the read-only screen. Click Save to save and go to the
7
next screen.
Figure 17 Profile: Confirm Save
Click Activate Now to use the new profile immediately. Otherwise, click the
8
Activate Later button.
If you clicked Activate Later, you can select the profile from the list in the Profile
screen and click Connect to activate it.
Note: Only one profile can be activated and used at any given time.
Figure 18 Profile: Activate
When you activate the new profile, the ZyXEL utility returns to the Link Info
9
screen while it connects to the AP using your settings. When the wireless link is
established, the ZyXEL utility icon in the system tray turns green and the Link
Info screen displays details of the active connection.
10 Open your Internet browser, enter
web site in the address bar and press ENTER. If you are able to access the web
site, your new profile is successfully configured.
11 If you cannot access the Internet go back to the Profile screen, select the profile
you are using and click Edit. Check the details you entered previously. Also, refer
to the Troubleshooting section of this User's Guide or contact your network
administrator if necessary.
36
http://www.zyxel.com
P-870H/HW Series User's Guide
or the URL of any other