Configuration Summary - ZyXEL Communications P-870H Series User Manual

Chapter 5 WAN Setup

5.5.1.7 Configuration Summary

This read-only screen shows the current WAN connection settings.
Figure 38 WAN Configuration: Configuration Summary
The following table describes the labels in this screen.
Table 19 WAN Configuration: Configuration Summary
LABEL
Connection Type
Service Name
IP Address
Service State
NAT
Full Cone NAT
Firewall
IGMP Multicast
Quality Of
Service
Back
Apply/Save
70
DESCRIPTION
This is the encapsulation method used by this connection.
This is the name of the service.
This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
This shows whether this service is active or not.
This shows whether NAT is active or not for this connection.
This shows whether full cone NAT is active or not for this connection.
This shows whether Firewall is active or not for this connection.
This shows whether IGMP multicasting is active or not for this
connection.
This shows whether QoS is active or not for this connection.
Click this button to return to the previous screen.
Click this button to save your changes.
P-870H/HW Series User's Guide