Chapter 7 Wireless Lan; Overview; What You Can Do In This Chapter - ZyXEL Communications P-870H Series User Manual

C
H A P T E R

7.1 Overview

This chapter describes how to perform tasks related to setting up and optimizing
your wireless network, including the following.
• Turning the wireless connection on or off.
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Using a MAC (Media Access Control) address filter to restrict access to the
wireless network.
See Chapter 2 on page 27
connection in an example scenario.
See Section 7.10 on page 105
networks.

7.1.1 What You Can Do in this Chapter

This chapter describes the ZyXEL Device's Network > Wireless LAN screens.
Use these screens to set up your ZyXEL Device's wireless connection.
• The General screen lets you turn the wireless connection on or off, set up
wireless security and make other basic configuration changes
page 89). You can also configure the MAC filter to allow or block access to the
ZyXEL Device based on the MAC addresses of the wireless stations.
• The More AP screen lets you set up multiple wireless networks on your ZyXEL
Device (Section 7.5 on page
• Use the WPS screen and the WPS Station screen to use WiFi Protected Setup
(WPS). WPS lets you set up a secure network quickly, when connecting to other
WPS-enabled devices.
Use the WPS screen (see
generate a security PIN (Personal Identification Number) and see information
about the ZyXEL Device's WPS status.
Use the WPS Station (see
pressing a button or using a PIN.
P-870H/HW Series User's Guide
Wireless LAN
for a tutorial showing how to set up your wireless
for advanced technical information on wireless
97).
Section 7.6 on page 98) to enable or disable WPS,
Section 7.7 on page
7
(Section 7.4 on
100) screen to set up WPS by
85