ZyXEL Communications P-870H Series User Manual page 66

Chapter 5 WAN Setup
Table 15 WAN Configuration: IPoE
LABEL
DUID Type
DUID
Enterprise
number
Identifier
Enable DHCP
Option 125
Manufacturer
OUI
Product Class
Model Name
Serial Number
Use the following
Static IP address
WAN IP
Address
WAN Subnet
Mask
WAN gateway
IP Address
Back
Next
66
DESCRIPTION
Select Other to enter any string that identifies the ZyXEL Device in
the DUID field.
Select DUID-LL (DUID Based on Link-layer Address) to enter the
ZyXEL Device's hardware address, that is the MAC address in the
DUID field.
Select DUID-EN (DUID Assigned by Vendor Based on Enterprise
Number) to enter the vendor's registered private enterprise number.
Enter the DHCP Unique Identifier (DUID) of the ZyXEL Device.
Enter the vendor's 32-bit enterprise number registered with the IANA
(Internet Assigned Numbers Authority).
This field is available when you select DUID-EN in the DUID Type
field.
Enter a unique identifier assigned by the vendor.
This field is available when you select DUID-EN in the DUID Type
field.
Select this to add vendor specific information to DHCP requests that
the ZyXEL Device sends to a DHCP server when getting a WAN IP
address.
Specify the vendor's OUI (Organization Unique Identifier). It is usually
the first three bytes of the MAC address.
Enter the product class of the ZyXEL Device.
Enter the model name of the ZyXEL Device.
Enter the serial number of the ZyXEL Device.
Select this if you have a static IP address.
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Enter the gateway IP address provided by your ISP.
Click this button to return to the previous screen.
Click this button to continue.
P-870H/HW Series User's Guide