7.4.3 WPA(2)-PSK
In order to configure and enable WPA(2)-PSK authentication; click Network >
Wireless LAN to display the General screen. Select WPA-PSK or WPA2-PSK
from the Security Mode list.
Figure 47 Wireless LAN > General: WPA(2)-PSK
The following table describes the wireless LAN security labels in this screen.
Table 24 Wireless LAN > General: WPA(2)-PSK
LABEL
Auto Generate
Key
Security Mode
Active
Compatible
Encryption
P-870H/HW Series User's Guide
DESCRIPTION
This field is only available for WPA-PSK.
Select this option to have the ZyXEL Device automatically generate an
SSID and pre-shared key. The SSID and Pre-Shared Key fields will
not be configurable when you select this option.
Choose WPA-PSK or WPA2-PSK from the drop-down list box.
This field is only available for WPA2-PSK. Select this if you want the
ZyXEL Device to support WPA-PSK and WPA2-PSK simultaneously.
Select the encryption type (TKIP, AES or TKIP+AES) for data
encryption.
Chapter 7 Wireless LAN
93