Main Window; Status Bar - ZyXEL Communications P-870H Series User Manual

Table 2 Navigation Panel Summary
LINK TAB
Tools Firmware
Configuration
Restart
Diagnostic General
802.1ag

3.2.2 Main Window

The main window displays information and configuration fields. It is discussed in
the rest of this document.
Right after you log in, the Status screen is displayed. See
for more information about the Status screen.

3.2.3 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration
has been updated.
P-870H/HW Series User's Guide
FUNCTION
Use this screen to upload firmware to your device.
Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
This screen allows you to reboot the ZyXEL Device without turning
the power off.
Use this screen to test the connections to other devices.
Use this screen to configure CFM (Connectivity Fault
Management) MD (maintenance domain) and MA (maintenance
association), perform connectivity tests and view test reports.
Chapter 3 Introducing the Web Configurator
Chapter 4 on page 43
41