Wireless Security Screen; No Security - ZyXEL Communications WAP3205 User Manual

Chapter 10 Wireless LAN
Table 31 Network > Wireless LAN > General
LABEL
Enable
Intra-BSS
Traffic
Channel
Selection
Auto
Channel
Selection
Operating
Channel
Apply
Reset

10.5 Wireless Security Screen

Use this screen to select the wireless security mode for each SSID. Click Network
> Wireless LAN > Security to open the Security screen. The screen varies
depending on what you select in the Security Mode field.

10.5.1 No Security

Select No Security to allow wireless clients to communicate with the access
points without any data encryption.
102
DESCRIPTION
A Basic Service Set (BSS) exists when all communications between
wireless clients or between a wireless client and a wired network client go
through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-
BSS is enabled, wireless clients can access the wired network and
communicate with each other. When Intra-BSS is disabled, wireless clients
can still access the wired network but cannot communicate with each
other.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending
on the frequency band and the country you are in.
This option is only available if Auto Channel Selection is disabled.
Select the check box to have the WAP3205 automatically scan for and
select a channel which is not used by another device.
This displays the channel the WAP3205 is currently using.
Click Apply to save your changes back to the WAP3205.
Click Reset to reload the previous configuration for this screen.
WAP3205 User's Guide