ZyXEL Communications WAP3205 User Manual page 126

Chapter 12 Maintenance
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen
to upload firmware to your WAP3205.
Figure 69 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 47 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Note: Do not turn off the WAP3205 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before
logging into the WAP3205 again.
The WAP3205 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 70 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, an error message appears. Click Return to go
back to the Firmware Upgrade screen.
126
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to
two minutes.
WAP3205 User's Guide