ZyXEL Communications WAP3205 User Manual page 65

Table 13 Status Screen: Access Point Mode
LABEL
Status
Rate
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
CPU Usage
Memory Usage
System Setting
Configuration Mode
Summary
Packet Statistics
WLAN Station Status
6.4.0.1 Navigation Panel
Use the menu in the navigation panel to configure WAP3205 features in Access
Point mode.
WAP3205 User's Guide
DESCRIPTION
For the LAN ports, this field displays Down (line is down) or Up (line is up
or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
For the LAN ports, this displays the port speed or N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
This column shows the type of data the WAP3205 is recording.
This column shows the actual data recorded by the WAP3205.
This is the total time the WAP3205 has been on.
This field displays your WAP3205's present date and time.
This displays what percentage of the WAP3205's processing ability is
currently used. When this percentage is close to 100%, the WAP3205 is
running at full load, and the throughput is not going to improve anymore.
If you want some applications to have more throughput, you should turn
off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the WAP3205 is using.
This shows the web configurator mode you are viewing - Expert.
Click Details... to go to the Monitor >
(Section 9.4 on page 92). Use this screen to view port status and packet
specific statistics.
Click Details... to go to the Monitor >
(Section 9.5 on page 94). Use this screen to view the wireless stations
that are currently associated to the WAP3205.
Chapter 6 Access Point Mode
Packet Statistics screen
WLAN Station Status screen
65