Configuring Security Settings Of Multiple Ssids - ZyXEL Communications WAP3205 User Manual

Clients can associate only with the SSIDs for which they have the correct security
settings. Clients using different SSIDs can access the Internet and the wired
network behind the WAP3205 (such as a printer), but they cannot listen to each
other's traffic.
For example, you may set up three wireless networks (A, B and C) in your office.
A is for workers, B is for guests and C is specific to a VoIP device in the meeting
room.

4.5.1 Configuring Security Settings of Multiple SSIDs

The WAP3205 is in access point mode by default. If you want to use multiple
SSIDs when the WAP3205 is in universal repeater mode, see
81 for how to set the WAP3205 to universal repeater mode.
This example shows you how to configure the SSIDs with the following parameters
on your WAP3205 (in access point mode).
SSID
SSID_Worker
SSID_Guest
SSID_VoIP
Connect your computer to the LAN port of the WAP3205 using an Ethernet cable.
1
WAP3205 User's Guide
A
SSID_Worker
B
SSID_Guest
SECURITY TYPE KEY
WPA2-PSK DoNotStealMyWireless
Network
WPA Compatible
Static WEP 128bit keyexample123
WPA-PSK VoIPOnly12345678
Chapter 4 Tutorials
C
SSID_VoIP
Chapter 8 on page
MAC FILTERING
Disable
Disable
Allow
00:A0:C5:01:23:45
39