ZyXEL Communications WAP3205 User Manual page 131

LABEL
Client Mode
Universal
Repeater
Mode
Apply
Reset
Note: If you select the incorrect System Operation Mode you may not be able to
connect to the Internet.
WAP3205 User's Guide
DESCRIPTION
Select Client Mode if your device needs a wireless client to connect to an
existing access point.
• You cannot configure wireless LAN settings like MAC filtering, QoS,
WDS and scheduling in the client mode.
• The IP address of the device on the local network is the same as the IP
address given to the WAP3205 while in access point mode (default is
192.168.1.2).
Select Universal Repeater Mode if you want to have wireless clients
associate with the WAP3205 and also want to connect the WAP3205 to an
existing access point.
• In addition to wireless LAN settings between the WAP3205 and wireless
clients, you also need to configure security and wireless settings
between the WAP3205 and another access point.
• WDS is not available when the WAP3205 is in universal repeater mode.
• The IP address of the device on the local network is the same as the IP
address given to the WAP3205 while in access point mode (default is
192.168.1.2).
Click Apply to save your settings.
Click Reset to return your settings to the default (Router)
Chapter 12 Maintenance
131